gal\) \(maximum\)] volatile organic content \(VOC\) gray, interior deck enamel \(Formula No. 20L\) for shipboard use as a general purpose interior deck enamel for application to either primed steel or aluminum \(see 6.1\). Product is supplied in a single can and used as supplied.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19

MIL-DTL-700B

TABLE VII.

Suggested packing and packaging.

Packaging

Recommended requirements for direct Government acquisitions

Unit of

The paints covered by this specification should be purchased by

procurement

volume. The unit of procurement should be in multiples of 1 L

or 1 U.S. liquid gallon at 15.5 C (60 F).

Containers

(a) The components should be furnished in cans of appropriate

volume such as 3.78L (1 gallon) or multiples thereof.

(b) Multiple friction plug containers should be in accordance

with PPP-C-96, type V, class 2. Interior coatings should be as

specified therein. Exterior coatings, including side seam

stripping, should be as specified therein for plan B. Wire

handles as specified therein, should be provided for the 3.78-L

(1-gallon) container. Closure of the properly filled and

sealed cans should be as specified in the appendix thereto.

(d) All containers should comply with the requirements of the

Uniform Freight Classifications (UFC), the National Motor

Freight Classification (NMFC), and the applicable requirements

of 49CFR, Department of Transportation (DOT).

Intermediate

(a) Paints should be packaged in intermediate containers.

containers

(b) Intermediate containers should be close-fitting corrugated

fiberboard boxes in accordance with UFC, NMFC, and 49CFR

requirements. Fiberboard used in the construction of interior

(unit and intermediate) and exterior containers, including

interior packaging forms, should conform to the ASTM D 4727.

ASTM D 4727 classes should be domestic fire-retardant or

weather resistant fire-retardant as specified.

Commercial

(a) Commercial packaging should be to ASTM D 3951.

packaging

(b) All containers should comply with the requirements of the

uniform Freight Classifications (UFC), the National Motor

Freight Classification (NMFC), and the applicable requirements

of the Code of Federal Regulations 49CFR, Department of

Transportation (DOT).