A-A-2850 Coating Compound, Waterborne Polymeric (Interior, Wood)This description covers a low VOC clear waterborne polymeric coating in three gloss levels for application by brush or spray. The coating is intended for use as a topcoat on interior wood, but is not suitable for use on floors.

Pages 1 - 2 - 3

A-A-2850

7. NOTES.

7.1 Addresses for obtaining copies of referenced documents.

ASTM Standards are available from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103. The issue of the ASTM test methods in effect on the date of the solicitation shall be used to determine compliance with these requirements.

Information on the EPA 33/50 program is available from USEPA 33/50 Program (TS-792A), 401 M Street SW, Washington, DC 20460.

7.2 Testing standards and footnotes.

1/ Panels shall be a hardwood plywood. Apply these coats at a wet film thickness of 50-75 microns (2-3 mils), allowing 30 minutes between each coat. The panels shall be allowed to dry overnight before testing.

2/ Panels used shall be Leneta cards, coated with three coats at a wet film thickness of 50-75 microns (2-3 mils) each, allowing 30 minutes between each coat. The cards shall be allowed to dry overnight before testing.

MILITARY COORDINATION

CUSTODIAN:

AIR FORCE-99

REVIEWER

AIR FORCE-84

PREPARING ACTIVITY:

GSA-FSS