MIL-DTL-24441/24B(SH)
QUANTITATIVE REQUIREMENTS: The paint shall meet the following quantitative requirements and the
qualitative requirements of section 3 of the general specification. The components A and B shall be mixed 1:1 by
volume for mixed component tests. Tests shall be performed in accordance with the general specification.
Component A
Component B
Mixed components
Requirements
Min
Max
Min
Max
Min
Max
Pigment content, percent (%)
46.5
50.5
24.8
28.8
---
---
Volatiles, %
28.0
32.0
19.6
23.6
---
---
Nonvolatile vehicle, %
19.5
23.5
49.6
53.6
---
---
Water, %
---
1.5
---
0.5
---
---
Coarse particles, %
---
0.3
---
0.3
---
---
Consistency, grams
---
460
---
275
---
---
Kilograms per liter (kg/L)
1.33 (11.1)
1.38 (11.5)
1.20 (10.1)
1.32 (11.0)
---
---
(pounds per gallon (lb/gal))
Set to touch, hours
a. at 4.4 °C (40 °F)
---
---
---
---
---
2
b. at 23 °C (73 °F)
---
---
---
---
---
2
Dry-hard, hours
a. at 4.4 °C (40 °F)
---
---
---
---
---
24
b. at 23 °C (73 °F)
---
---
---
---
---
6
Fineness of grind, NS
5
---
5
---
---
---
Flash point, C (F)
35.6 (96)
---
37.8 (100)
---
35.6 (96)
---
Pot life, hours at 23 C (73 F)
---
---
---
---
5
---
Sag resistance, micrometers
---
---
---
---
225 (9)
---
(mils)
Color of wet film, Rw %
---
---
---
---
1.74
2.06
Weight per epoxy vehicle
---
---
175
195
---
---
Contrast ratio, 3-mil dry film
---
---
---
---
0.98
---
thickness
Gloss, 60 degree specular, %
---
---
---
---
---
30
VOC, grams per liter (g/L)
---
---
---
---
---
340 (2.8)
(lb/gal)
1/
Thixatrope to be used is the manufacturer's choice. In the development of component A, 6.80 kilograms
(15 pounds) (7.95 liters (2.1 gallons)) of Disparlon NS-30 made by King Industries were used.
Manufacturer is responsible for choosing a thixatrope that meets all the requirements herein, including
shelf life. Thixatrope is a pigment for calculation purposes.
2/
GENAMID 2000, Cognis Corp.; ANCAMIDE 507, Air Products Chemical Corp.; EPOTUF SF7791,
REICHHOLD Chemical.
3/
VERSAMID 280B75, Cognis Corp.; ANCAMIDE 700B75, Air Products Chemical Corp.; EPOTUF
SF7792, REICHHOLD Chemical.
4/
Nicron 503, Luzenac Inc.
5/
Titanium dioxide conforming to ASTM D476, Type IV. In the development of component A, DuPont
Tipure R960 was used.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business