MIL-DTL-24441D(SH)
ASTM D3278
-
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup
Apparatus
ASTM D3960
-
Standard Practice for Determining Volatile Organic Compound (VOC) Content of
Paints and Related Coatings
ASTM D4400
-
Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator
ASTM D4417
-
Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned
Steel
ASTM D4541
-
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion
Testers
ASTM E260
-
Standard Practice for Packed Column Gas Chromatography
ASTM E1252
-
Standard Practice for General Techniques for Qualitative Infrared Analysis
(Copies of these documents are available from ASTM International, 100 Barr Harbor Dr., PO Box C700, West
Conshohocken, PA 19428-2959 or online at www.astm.org.)
INTERNATIONAL AGENCY FOR RESEARCH ON CANCER (IARC)
International Agency for Research on Cancer (IARC) Monographs
(Copies of this document are available from WHO Press, World Health Organization, CH-1211 Geneva 27,
Switzerland or online at www.who.int/bookorders.)
NATIONAL TOXICOLOGY PROGRAM (NTP)
Latest Annual Report on Carcinogens, Summary, National Toxicology Program
(Copies of this document are available from NIEHS, Public Information Office, MD B2-04, Research Triangle
Park, NC 27709 or online at https://library.niehs.nih.gov.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws
and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in accordance with
the applicable specification sheet. In the event of any conflict between the requirements of this specification and the
specification sheet, the latter shall govern.
3.2 Qualification. The paints furnished under this specification shall be products that are authorized by the
qualifying activity for listing on the applicable qualified products list before contract award (see 4.2 and 6.3).
3.3 Manufacturer. The paint shall be manufactured (see 6.5) and supplied as a two-component system
formulated in accordance with the applicable specification sheet to produce a uniform, high quality product capable
of meeting all requirements.
3.4 Composition. The components shall be manufactured using the material specified in the specification sheet
and in the proportions as specified in the individual specification sheets. The components shall be completely
compatible so, when components A and B are mixed as specified by volume, the paint shall be suitable for spray
applications above 4.4 degrees Celsius (°C) (40 degrees Fahrenheit (°F)), and shall meet all other specified
requirements. To achieve specified colors, pigments dispersed in polyamide may be used for tinting provided all
requirements of the specification are met. Added pigment shall not exceed 120 grams for 100 liters (1 pound for 100
gallons).
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business