MIL-DTL-24631/1C(SH)
8/ The naphtha shall be any naphtha with an aromatic content of 97-99% and
a minimum flash point of 43 C (110 F) when measured in accordance with
ASTM D 3278.
9/ Normal-butyl alcohol (n-butyl alcohol, n-butanol) shall meet the
requirements of ASTM D 304.
10/ The thickener activator shall be "propylene carbonate" available from
Jefferson Chemical, Shaker Heights, OH, or equivalent.
11/ The epoxy resin shall be Scotch Weld 2216B (Clear Amber) available from
the 3M Company, 3M Center, 2501 Hudson Road, St. Paul, MN 55144 or
equivalent such as Epon 828 from Shell Chemical Co.. See 3.5.7 of
MIL-DTL-24631A(SH).
12/ Normal-Butyl acetate (n-Butyl acetate) shall conform to the requirements
of ASTM D 4615.
Use of alternate ingredients in the formula must have prior approval of the
Naval Sea Systems Command. Approval will be based on review of data showing
equivalent physical and chemical characteristics to the specified ingredient.
It will be necessary to demonstrate that the paint compound made using the
alternative ingredient will conform to all requirements of the MIL-DTL-24631
general specification.
QUANTITATIVE REQUIREMENTS. The paint shall meet the quantitative require-
ments of table III and the qualitative requirements of section 3 of the
MIL-DTL-24631 general specification.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business