MIL-PRF-24596B(SH)
3.3.2 Colors. Colors shall be supplied as ready mixed products.
TABLE I. Colors.
FED-STD-595
Color name
color chip number
Soft white
27880
Pastel green
24585
Bulkhead gray
26307
Sun glow
23697
Green gray
26496
Yellow gray
26400
Pearl gray
26493
Pastel blue
25526
Beach sand
22563
Rosewood
22519
Clipper blue
24516
3.4 Identification characteristics. Coatings shall be identified by product name, color, and a unique alpha,
numeric, or alpha-numeric identifier. Values for coating identification characteristics and the mixing, application
instructions, and test methodology used to determine those characteristics indicated by an "X" in table II shall be
provided by manufacturers seeking qualified product listing (QPL). The values shall be established for each coating
system prior to qualification testing. The purpose of these values is to serve as a basis for determining that the
material being offered is essentially the same as that which was approved under qualification testing. Subject to
review by the Naval Sea Systems Command (NAVSEA), alternative identification characteristics (for example,
infrared spectrographic examination and chemical analysis) may be substituted for the characteristics in table II,
provided appropriate test methodology is submitted by the manufacturer.
TABLE II. Required identification characteristics.
Characteristic
Single component materials
Chemical nature of resin(s)
X
Percent of principal constituents (5 percent
X
by weight (wt%) or more of total)
Pigment, wt%
X
Nonvolatile vehicle, wt%
X
Total solids, wt%
X
Color (as descriptive name and FED-STD-
X
595 number)
Volatile, wt%
X
Mass per unit volume in g/L (lb/gal)
X
Viscosity in Kreb units (KU) or Poise
X
Flash point as Setaflash or Pensky-Martin
X
closed cup, °C
Pot life
----
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business