A-A-2962A
3.0 SALIENT CHARACTERISTICS (Continued)
|
Characteristics |
Requirements |
Test Methods |
||
|
Lusterless |
Semigloss |
Gloss |
||
|
Total solids (wt. basis) |
55% min. |
55%min. |
55% min. |
ASTM D 1644 |
|
Total solids (vol. basis) |
38% min. |
38% min. |
38% min. |
ASTM D 2697 |
|
Vehicle type |
Alkyd |
Alkyd |
Alkyd |
ASTM D |
|
solids (N.V. wt basis) |
27% min. |
40% min. |
40% min. |
ASTM D 2372 |
|
Gloss @ 60o (specular) |
<4 |
15-25 |
>70 min. 20o |
ASTM D 523 |
|
Contrast ratio (max.) @ 0.001 dry film thk. |
#37925 0.92 #33538 0.88 #32246 0.90 #13136 0.90 #others 0.98 |
#27925 0.92 #23538 0.88 #21136 0.90 #others 0.98 |
#17925 0.94 #12197 0.82 #12199 0.88 #13538 0.92 #13655 0.88 #11105 0.92 #11136 0.92 #11140 0.92 #others 0.98 |
ASTM D 2805 |
|
Viscosity (maximum) |
199 secs |
199 secs |
199 secs |
ASTM D 1200** |
|
Flexibility |
No cracking |
No cracking |
No cracking |
ASTM D 522 |
|
Adhesion |
3B rating + |
3B rating + |
3B rating + |
ASTM 3359 |
|
Recoating |
|
|
|
|
|
Loss of hardness |
None |
None |
None |
ASTM D 1474 |
|
Loss of adhesion |
None |
3B rating + |
3B rating + |
ASTM D 3359 |
|
Wrinkling |
None |
None |
None |
Visual |
|
Drying time, to-touch |
2 hrs |
2 hrs |
2 hrs |
ASTM D 1640 |
|
Dry-through |
8 hrs |
8 hrs |
8 hrs |
|
|
Dry-hard |
48 hrs |
48 hrs |
48 hrs |
|
|
Water content (wt. basis of liquid enamel) |
0.50% max |
0.50% max |
0.50% max |
ASTM D 3792 |
**No. 4 Ford cup
3.1 Quantitive Requirements.
Color. This Commercial Item Description is not limited in color. If not otherwise specified in the purchase order or contract, the colors shall be a close visual match to Federal Standard 595B when applied to a black and white hiding chart until complete hiding is obtained, and tested in accordance with ASTM 1729. Black colors may be darker or jetter than specified.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business