MIL-DTL-15090E
TABLE VI. Test procedures - Continued.
FED-STD-141
ASTM test
Test
Requirement
Test
test method
method
Contrast ratio 1/
Table III
----
-----
D2805
3.6.11 and
-----
D3363
Pencil hardness
table III
Off-gassing
----
----
NOTES:
1/
Conformance inspection test (see 4.3).
2/
By data certification.
4.7.1 Volatile organic compounds (VOC). VOC content shall be determined in accordance with 40 CFR 60,
Appendix A-7, Method 24. VOC content shall be as specified in table III.
4.7.2 Soluble and total metal content. Asbestos, soluble and total metal content, except tantalum and tungsten,
shall be determined on a dry film of the enamel in accordance with the 40 CFR 261.24(a) and the appropriate test
listed below (see table VII and table VIII). Asbestos shall be analyzed in accordance with 29 CFR 1915.1001,
Appendix K and the results shall be recorded as percent by weight of the dry enamel film. Soluble metal content
shall be analyzed as milligrams per liter (mg/L) (see table IV). Total metal content shall be analyzed as percent by
weight of the dry enamel film. The test results for asbestos, each individual soluble metal, and total metal shall be
as specified in 3.5.1. Tantalum and tungsten soluble metal content and total metal content shall be analyzed as
specified in 4.7.2.1.
TABLE VII. Test methods for evaluating solid waste
physical/chemical methods, EPA SW-846.
Metal/material
Digestion test method
All metals, except chromium (VI)
3050
Chromium (VI)
3060
Metal/material
SW-846 Analysis test method
Antimony
7040 or 7041
Arsenic
7060 or 7061
Barium
7080 or 7081
Cadmium
7131
Total chromium
7190
Chromium (VI)
7195, 7196 or 7197
Lead
7421
Mercury
7470 or 7471
Nickel
7520 or 7521
Selenium
7740 or 7741
Silver
7760 or 7761
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business