MIL-DTL-15090E
TABLE III. Formula no. 111 quantitative requirements - Continued.
Requirements
Characteristics
Minimum
Maximum
Sag resistance, mm (mils)
0.11 (5)
-----
VOC, g/L (pounds/gallon)
------
250 (2.09)
Asbestos content, %WT of dry film
------
0.5
Crystalline silica content, %WT of dry film
------
0.5
3.5.1 Hazardous metal content. When tested as specified in 4.7.2, the content of each soluble metal and total
content of each metal of the enamel shall be less than the values as specified in table IV and table V. If the test for
total metal results in a value less than the soluble metal limit, the soluble metal test need not be conducted. The total
TABLE IV. Hazardous soluble metals content.
Soluble metal and/or its compounds
Maximum, mg/L
Antimony and its compounds
15.0
Arsenic and its compounds
5.0
Barium and its compounds (excluding barite)
100.0
Beryllium and its compounds
0.75
Cadmium and its compounds
1.0
Chromium (VI) compounds
1.0
Chromium and its chromium (III) compounds
560.0
Cobalt and its compounds
50.0
Copper and its compounds
25.0
Fluoride salts
180.0
Lead and its compounds
5.0
Mercury and its compounds
0.2
Molybdenum and its compounds
350.0
Nickel and its compounds
20.0
Selenium and its compounds
1.0
Silver and its compounds
5.0
Tantalum and its compounds
100.0
Thallium and its compounds
7.0
Tungsten and its compounds
100.0
Vanadium and its compounds
24.0
Zinc and its compounds
250.0
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business