An Integrated Publishing, Inc. Site

An Integrated Publishing Website

MIL-DTL-15090 Enamel, Equipment, Light Gray \(Navy Formula No.111\)This specification covers a 250-gram per liter \(maximum\) \(2.08 pounds per gallon [maximum]\) volatile organic content \(VOC\) complying paint. The paint is a light gray equipment enamel \(Navy Formula Number 111\) for shipboard use as a topcoat on equipment, machinery, furniture and electrical equipment, such as switchboard installations. This product may be used wherever VOC air pollution regulations apply. The light gray equipment enamel covered by this specification is an air dry, solvent base coating for use in all interior dry areas including applications covered by reactor plant painting schedules. This product is supplied in a single can and used as supplied without thinning.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18

MIL-DTL-15090E

TABLE IX. Suggested packing and packaging - Continued.

Packaging

Recommended requirements for direct Government acquisitions

Packing for Navy

Treated lumber and plywood. All lumber and plywood, including laminated veneer

acquisitions

materials, used in shipping container and pallet construction, member, blocking, bracing,

and reinforcing should be fire-retardant treated material in accordance with MIL-L-19140

as follows:

a. General use, weather resistant: MIL-L-19140, Type II, Category I.

b. General use, non-weather resistant: MIL-L-19140, Type I, Category I.

Material safety data

A copy of the MSDS and ASTM F718 should be attached to the shipping document for

sheets (MSDS) and

each destination (see 6.6).

ASTM F718

VOC certification

VOC certification sheets for each batch of coating will be provided when requested by

sheets

the procuring activity.

TABLE X. Suggested marking.

Marking type

Recommended marking

Bar codes

Marking should include bar codes

Hazardous warnings

Labels should be in accordance with 29 CFR Parts 1910, 1915, 1917, 1918, 1926,

and 1928.

b. All individual containers should have the following marking:

"CAUTION: This paint contains volatile solvents, with probable hazardous vapors.

Use with adequate ventilation. Avoid prolonged breathing of vapors or spray mists.

The solvents are highly flammable, avoid open flame and smoking."

c. Each paint container, shipping container, and palletized load should be marked with

the appropriate hazardous symbol in accordance with FED-STD-313.

Volatile organic

"Contains a maximum of 250 grams of solvent of volatile organic content (VOC) per

content (VOC)

liter of paint per 40 CFR 60, CH. 1, Appendix A-7 (EPA) Method 24."

OSHA Hazard

Markings should include all information necessary to comply with OSHA Hazard

Communication Act

Communication Act and FED-STD-313.

and FED-STD-313

Mixing and use

Directions should include mixing, application equipment directions, limitations on

instructions

thinning, temperature range for use and surface preparation recommendations.

Directions should refer user to data sheets, MSDS and ASTM F718 for information.

6.11 Definitions.

6.11.1 Lot. A lot consists of all material manufactured at one time (batch) or all material produced by mixing

multiple batches into one uniform unit of material.

6.12 Subject term (key word) listing.

Alkyd

Chromium free

Cobalt compounds

Equipment paint

Lead free

Pigment