MIL-DTL-24441/35B(SH)
1/
Thixatrope to be used is the manufacturer's choice. In the development of component A, 6.80 kilograms
(15 pounds) (7.95 liters (2.1 gallons)) of Disparlon NS-30 made by King Industries were used.
Manufacturer is responsible for choosing a thixatrope that meets all the requirements herein, including
shelf life. Thixatrope is a pigment for calculation purposes.
2/
GENAMID 2000, Cognis Corp.; ANCAMIDE 507, Air Products Chemical Corp.; EPOTUF SF7791,
REICHHOLD Chemical.
3/
Aradur 283, Huntsman Advanced Materials.
4/
Titanium dioxide conforming to ASTM D476, Type IV. In the development of component A, DuPont
Tipure R960 was used.
5/
Nicron 503, Luzenac, Inc.
6/
Butyl alcohol conforming to ASTM D304.
7/
Red Iron Oxide RO-6097 or RO4097, Elementis Pigments.
8/
Yellow Iron Oxide YO-3587, Elementis Pigments; Yellow Iron Oxide YLO3288D, Rockwood Pigments.
9/
Thixatrope to be used is the manufacturer's choice. In the development of component B, 6.80 kilograms
(15 pounds) (6.81 liters (1.8 gallons)) of Disparlon 6500 made by King Industries were used.
Manufacturer is responsible for choosing a thixatrope that meets all the requirements herein, including
shelf life. Thixatrope is a pigment for calculation purposes.
10/
EPON 828, Hexion Chemical Co.; ARALDITE 6010, Huntsman Advanced Materials; DER 331, Dow
Chemical Corp.; EPO-TUF 37-140, REICHHOLD Chemical Corp.
11/
Conforming to ASTM D3734, Type I. In the development of component B, AMSCO Super High Flash
Naphtha was used.
12/
Huber 70C, J.M. Huber Corp.; Satintone #1, Englehard Mineral and Chemical Co.
13/
Use FED-STD-595 color chip number 20152. Color shall approximately match the color chip.
14/
For VOC calculations, component A makes approximately 383 liters (101 gallons) and component B
makes approximately 386 liters (102 gallons).
Use of alternate ingredients in this formula must have prior approval of the Naval Sea Systems Command.
Approval will be based on review of data demonstrating equivalent physical, chemical and performance
characteristics of paint manufactured with the proposed alternate material and the requirements as specified in 3.4.1
of MIL-DTL-24441. Paint incorporating the proposed alternate ingredient shall conform to all the requirements of
this military specification sheet and the general specification.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes
with respect to the previous issue due to the extent of the changes.
Preparing Activity
Navy SH
(Project 8010-2009-019)
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using the
ASSIST Online database at https://assist.daps.dla.mil.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business