MIL-DTL-24441/40B(SH)
7/
Thixatrope to be used is the manufacturer's choice. In the development of component B, 4.54 kilograms
(10 pounds) of Disparlon 6500 made by King Industries were used. Manufacturer is responsible for choosing
a thixatrope that meets all the requirements herein, including shelf life. Thixatrope is a pigment for
calculation purposes.
8/
EPON 828, Hexion Chemical Co.; ARALDITE 6010, Huntsman Advanced Materials; DER 331, Dow
Chemical Corp.; EPO-TUF 37-140, REICHHOLD Chemical Corp.
9/
Bayferrox Red Iron Oxide 180M, Lanxess Pigments.
10/
Conforming to ASTM D3734, Type I. In the development of component B, AMSCO Super High Flash
Naphtha was used.
11/
For VOC calculations, component A makes approximately 386 liters (102 gallons) and component B makes
approximately 386 liters (102 gallons).
Use of alternate ingredients in this formula must have prior approval of the Naval Sea Systems Command.
Approval will be based on review of data demonstrating equivalent physical, chemical and performance
characteristics of paint manufactured with the proposed alternate material and the requirements as specified in 3.4.1
of MIL-DTL-24441. Paint incorporating the proposed alternate ingredient shall conform to all the requirements of
this military specification sheet and the general specification.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes
with respect to the previous issue due to the extent of the changes.
Preparing Activity
Navy SH
(Project 8010-2009-024)
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using the
ASSIST Online database at https://assist.daps.dla.mil.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business