INCH-POUND
MIL-DTL-24607B
23 October 2008
SUPERSEDING
DOD-E-24607A
13 July 1987
DETAIL SPECIFICATION
ENAMEL, INTERIOR, NONFLAMING (DRY),
CHLORINATED ALKYD RESIN, SEMIGLOSS
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a semigloss, chlorinated alkyd resin, interior enamel that does not support
combustion or flaming when dry, and is for use on primed, smooth metal, glass reinforced plastic (GRP), wood and
plastic/composite surfaces.
1.2 Classification. Enamel covered by this specification is chlorinated alkyd resin enamel furnished in the
following colors as specified (see 6.1 and 6.2).
a.
Beach Sand, FED-STD-595 color number 22563
b.
Rosewood, FED-STD-595 color number 22519
c.
Clipper Blue, FED-STD-595 color number 24516
d.
Sun Glow, FED-STD-595 color number 23697
e.
Soft White (Formula 124), FED-STD-595 color number 27880
f.
Pastel Green (Formula 125), FED-STD-595 color number 24585
g.
Bulkhead Gray (Formula 126), FED-STD-595 color number 26307
h.
Green Gray, FED-STD-595 color number 26496
i.
Yellow Gray, FED-STD-595 color number 26400
j.
Pearl Gray, FED-STD-595 color number 26493
k.
Pastel Blue, FED-STD-595 color number 25526
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to: Commander, Naval Sea Systems
Command, ATTN: SEA 05M2, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160
or emailed to CommandStandards@navy.mil, with the subject line "Document Comment". Since contact
information can change, you may want to verify the currency of this address information using the ASSIST Online
database at https://assist.daps.dla.mil.
AMSC N/A
FSC 8010
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business