MIL-DTL-24607B
ASTM D1210
-
Standard Test Method for Fineness of Dispersion of Pigment-Vehicle
Systems by Hegman-Type Gage (DoD adopted)
ASTM D1296
-
Standard Test Method for Odor of Volatile Solvents and Diluents (DoD
adopted)
ASTM D1364
-
Standard Test Method for Water in Volatile Solvents (Karl Fischer
Reagent Titration Method)
ASTM D1849
-
Standard Test Method for Package Stability of Paint (DoD adopted)
ASTM D2244
-
Standard Practice for Calculation of Color Tolerances and Color
Differences from Instrumentally Measured Color Coordinates (DoD
adopted)
ASTM D2369
-
Standard Test Method for Volatile Content of Coatings
ASTM D2805
-
Standard Test Method for Hiding Power of Paints by Reflectometry
ASTM D3278
-
Standard Test Methods for Flash Point of Liquids by Small Scale Closed-
Cup Apparatus
ASTM D3359
-
Standard Test Methods for Measuring Adhesion by Tape Test (DoD
adopted)
ASTM D4400
-
Standard Test Method for Sag Resistance of Paints Using a Multinotch
Applicator
ASTM D5150
-
Standard Test Method for Hiding Power of Architectural Paints Applied
by Roller
ASTM D5895
-
Standard Test Methods for Evaluating Drying or Curing During Film
Formation of Organic Coatings Using Mechanical Recorders
ASTM E162
-
Standard Test Method for Surface Flammability of Materials Using a
Radiant Heat Energy Source (DoD Adopted)
ASTM E1252
-
Standard Practice for General Techniques for Obtaining Infrared Spectra
for Qualitative Analysis
(Copies of these documents are available from ASTM International, 100 Barr Harbor Drive, West
Conshohocken, PA 19428-2959 or online at www.astm.org.)
THE SOCIETY FOR PROTECTIVE COATINGS (SSPC)
SP 10
-
Near-White Blast Cleaning (DoD Adopted)
(Copies of this document are available from SSPC Publication Sales, 40 24th Street, 6th floor, Pittsburgh, PA
15222-4656 or www.sspc.org.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between
the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in accordance
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business