INCH-POUND
MIL-P-38336A(USAF)
16 September 1994
SUPERSEDING
MIL-P-38336(USAF)
27 November 1964
MILITARY SPECIFICATION
PRIMER COATING, INORGANIC, ZINC DUST PIGMENTED, SELF-CURING, FOR STEEL SURFACES
This specification is approved for use by the Department of the Air Force and is available for use by all
Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a ready-to-mix, two component, self-curing, inorganic zinc rich primer for use on steel surfaces.
2. applicable documents
2.1 Government documents
2.1.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS Federal
QQ-S-698 Steel, Sheet and Strip, Low Carbon
TT-P-143 Paint, Varnish, Lacquer, and Related Materials; Packaging, Packing, and Marking of
TT-P-460 Pigment, Zinc-Dust (Metallic-Zinc-Powder) Dry
TT-S-735 Standard Test Fluids; Hydrocarbon
UU-T-106 Tape, Pressure-Sensitive Adhesive, Masking, Paper
Military
MIL-A-6091 Alcohol, Ethyl, Specially Denatured, Aircraft
MIL-L-7808 Lubricating Oil, Aircraft Turbine Engine, Synthetic Base
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: ASD/ENOS, Building 125, 2335 Seventh Street, Suite 6, Wright-Patterson AFB OH 45433-7809 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter
AMSC/NA FSC 8010
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business