MIL-P-38336A(USAF)
5.1.2 Level B. Packaging shall be in accordance with the manufacturer's commercial practice.
5.2 Packing. Packing shall be level A, B, or C as specified (see 6.2).
5.2.1 Level A. The primer shall be packed in overseas type shipping containers according to the requirements of TT-P-143.
5.2.2 Level B. The primer shall be packed in domestic type shipping containers according to the requirements of TT-P-143.
5.2.3 Level C. The primer shall be packed in a manner to insure carrier acceptance and safe delivery at destination. Containers shall be in accordance with Uniform Freight Classification Rules or regulations of other carriers applicable to the mode of transportation.
5.3 Marking. Interior and exterior containers shall be marked in accordance with the requirements of MIL-STD-129. In addition, individual containers shall be marked, either by stencil or durably attached labels, with mixing, thinning, application, and curing instructions, as applicable. Each dry zinc dust container shall bear the following information:
PRIMER COATING, INORGANIC, ZINC DUST PIGMENTED,
SELF-CURING, FOR STEEL SURFACES Specification MIL-P-38336A(USAF)
Mix entire contents of this container
with *(amount) of formula No. *
liquid vehicle
*Manufacturer shall enter appropriate data.
5.3.1 Marking precautionary. Each container of liquid vehicle shall be marked with the following precautionary marking:
DO NOT STORE AT TEMPERATURES ABOVE 100°F.
5.3.2 Labeling. Labeling shall be required in accordance with the requirements of appropriate Federal Statutes and Regulations, e.g., Federal Hazardous Substance Labeling Act, etc., or as prescribed by the processing agency upon advice and recommendations of the departmental medical services.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. The inorganic zinc rich primer covered by this specification is for use on surfaces of steel structures that receive severe exposure to adverse weather, condensing moisture, corrosive atmospheres and marine environments. The primer may be applied under conditions of high humidity and condensing moisture.
6.2 Acquisition requirements. Acquisition documents should specify the following information:
a. Title, number and date of this specification.
b. That the unit of purchase and sale be the U.S. gallon of 231 cubic inches of mixed primer at 77°F. c. Applicable levels of packaging and packing (see 5.1 and 5.2).
d. Required type and size of container.
Source: https://assist.dla.mil -- D1oOwnloaded: 2014-09-30T21:22Z Check the source to verify that this is the current version before use.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business