NOT MEASUREMENT
SENSITIVE
MIL-PRF-22750G
12 September 2011
SUPERSEDING
MIL-PRF-22750F
31 May 1994
PERFORMANCE SPECIFICATION
COATING, EPOXY, HIGH-SOLIDS
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for a two component, high solids epoxy
coating. This coating is free of all inorganic hazardous air pollutants (HAPS), including
compounds of lead and chromium. The coating is supplied as a kit.
1.2 Classification. The coatings are of the following types, classes and grades, as specified (see 6.2)
1.2.1 Types. The coating will be furnished in the following types as specified. Whenever one of
the following coating types is not cited in a relevant contractual document or drawing, select type I
or II for Navy use and type II or III for Army use.
Type I
-
Standard formulation with a maximum volatile organic compound (VOC)
content of 340 grams/liter (g/l) (2.8 pounds/gallon (lbs/gal)) as packaged.
Type II
-
Volatile organic hazardous air pollutants-free (VOHAP-free) formulation
to meet maximum VOC content of 340 g/l (2.8 lbs/gal) as packaged.
Type III -
Direct to metal, VOHAP-free formulation to meet maximum VOC content
of 340 g/l (2.8 lbs/gal) as packaged. As a direct to metal, this coating will
have enhanced corrosion performance including 1,000 hours salt spray and
40 cycles on the cyclic corrosion test. This type is only available in
semi-gloss and lusterless colors.
Type IV -
Self contained portable kits to include, but not limited to, brush, roller and
cartridge application. The kits contain the type II or III epoxy coating.
Comments, suggestions, or questions on this document should be addressed to: Director, U.S.
Army Research Laboratory, Weapons and Materials Research Directorate, Materials
Manufacturing Technology Branch, Specifications and Standards Office, ATTN: RDRL-WMM-D,
Aberdeen Proving Ground, MD 21005-5069 or emailed to richard.j.squillacioti.civ@mail.mil.
Since contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at https://assist.daps.dla.mil/.
AMSC N/A
FSC 8010
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business