MIL-PRF-22750G
ASTM D3924
-
Standard Specification for Standard Environment for
Conditioning and Testing Paint, Varnish, Lacquer, and Related
Materials. (DoD adopted)
ASTM D3960
-
Standard Practice for Determining Volatile Organic Compound
(VOC) Content of Paints and Related Coatings. (DoD adopted)
ASTM D5895
-
Standard Test Methods for Evaluating Drying or Curing During Film
Formation of Organic Coatings Using Mechanical Recorders.
ASTM E308
-
Standard Practice for Computing the Colors of Objects by Using
the CIE System. (DoD adopted)
ASTM E1331
-
Standard Test Method for Reflectance Factor and Color by
Spectrophotometry Using Hemispherical Geometry.
ASTM G155
Standard Practice for Operating Xenon Arc Light Apparatus for
-
Exposure of Non Metallic Materials. (DoD adopted)
Copies of these documents are available from www.astm.org or ASTM International, 100 Barr
Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959.)
GENERAL MOTORS ENGINEERING STANDARDS
GMW 14872
- Cyclic Corrosion Laboratory Test.
(Copies of this document are available from www.ihs.com or General Motors International,
General Motors Technical Center, Warren, MI 48092.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between the text of this document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless
a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Qualification. The coating furnished under this specification shall be a product which is
qualified for listing on the applicable Qualified Products Database (QPD) before contract award
(see 4.2 and 6.4). Any change in the formulation of a qualified product shall necessitate its
requalification. The material supplied under contract shall be identical, within manufacturing
tolerances, to the product receiving qualification.
3.2 Material. Materials used in the coating shall be specified herein. Materials not specified shall
be selected by the contractor and shall be subject to all provisions of this specification.
3.3 Composition. The coating shall consist of two components, as follows:
Component A - epoxy resin and solvents
Component B - polyamide and/or amine resin(s) and solvents
Component B shall act as the curing agent for component A. The components shall be packaged
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business