INCH-POUND
MIL-PRF-26915D
31 October 1997
SUPERSEDING
MIL-P-26915C (USAF)
20 March 1992
PERFORMANCE SPECIFICATION
PRIMER COATING, FOR STEEL SURFACES
This specification is approved for use by the Department of the Air Force and is available
for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers two types of primer coatings. The primers are compatible
with aliphatic polyurethane and enamel topcoats and have reduced volatile organic compound
(VOC) content.
1.2 Classification. The primer coating shall be of the following types and classes as specified:
Type I - Non-water reducible
Type II - Water reducible
Class A - 340 VOC grams per liter maximum
Class B - 250 VOC grams per liter maximum
1.3 Size of the kit. The components of the primer kit may be single component or multi-
component. The kit shall be furnished in the following sizes as specified:
QT = 1 quart
GL = 1 gallon
PL = 5 gallons
Beneficial comments (recommendations, additions, deletions) and any pertinent data that may be of use in
improving this document should be addressed to: WR-ALC/LKJE, 460 2ND ST STE 221, ROBINS AFB, GA
31098-1640, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end
of this document or by letter.
AMSC N/A
FSC 8010
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business