MIL-PRF-26915D
4.4 Inspection conditions. Unless otherwise specified, all inspections shall be performed IAW the
test conditions specified in the applicable test method documents or applicable paragraphs in this
specification.
4.5 Requirements cross-reference matrix. Table 1 provides a cross-reference matrix of the
Section 3 requirements tested or verified in the paragraphs below.
TABLE 1: Requirements Cross-Reference Matrix
REQUIREMENT
VERIFICATION
3.3.1
4.7.1
3.3.2
4.7.2
3.3.3
4.7.3
3.3.4
4.7.4
3.4.1
4.6.3.1
3.4.2
4.8.1
3.4.3
4.8.2
3.4.4
4.8.3
3.4.5
4.8.4
3.4.6
4.8.5
3.4.7
4.8.6
3.4.8
4.8.7
3.4.9
4.8.8
3.5.1
4.9.1
3.5.2
4.9.2
3.5.3
4.9.3
3.5.4
4.9.4
3.5.5
4.9.5
3.5.6
4.9.6
3.5.7
4.9.7
3.5.8
4.9.8
3.5.9
4.9.9
3.5.10
4.9.10
3.5.11
4.9.11
3.5.12
4.9.12
4.6 Test panels.
4.6.1 Test panel material. Test panels shall be prepared from steel IAW ASTM A 568, cold-
rolled. Panels shall be smooth and free from rust. The test panels shall be subject to the following
dimensions:
a. Panels shall be at least 2 inches wide by 4 inches long.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business