NOT MEASUREMENT SENSITIVE
MIL-PRF-81352C
16 June 2005
SUPERSEDING
MIL-PRF-81352B
31 July 1997
PERFORMANCE SPECIFICATION
COATINGS, AIRCRAFT TOUCH-UP
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers general touch-up coatings for use on aircraft and
support equipment. The volatile organic compound (VOC) content of these coatings is less than
340 grams/liter (g/l) (2.837 lbs/gal).
1.2 Classification.
1.2.1 Types. The coatings are of the following types, as specified (see 6.2):
Type I - Acrylic base
Type II - Alkyd base
Type III - Polyurethane base
1.3 Part or identifying number (PIN). PINS to be used for coatings acquired to this
specification are created as follows:
M81352
X
XX
XXXXX
Specification
Type designator
Container size
FED-STD-595
identification
Type I = 1
designator
Color designation
Type II = 2
1 pint = 1P
Type III = 3
1 quart = 1Q
1 gallon = 1G
1 Aerosol container = 1A
1 Touch-up kit = 1T
Comments, suggestions, or questions on this document should be addressed to: Commander, Naval
Air Warfare Center Aircraft Division, Code 491000B120-3, Highway 547, Lakehurst, NJ 08733-
5100 or emailed to thomas.omara@navy.mil. Since contact information can change, you may want
to verify the currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 8010
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business