INCH-POUND
MIL-PRF-83936C(USAF)
27 December 1996
SUPERSEDING
MIL-R-83936B (USAF)
13 January 1977
PERFORMANCE SPECIFICATION
REMOVER, PAINT, TANK TYPE; FOR AIRCRAFT WHEELS, LANDING GEAR
COMPONENTS, AND OTHER AIRCRAFT AND SUPPORT EQUIPMENT
This specification is approved for use by the Department of the Air Force and is available
for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification establishes the requirements for one type of activated solvent tank
type paint remover for use on aircraft wheels, landing gear components, and other aircraft and
support equipment components.
1.2 Classification. This specification covers one type of non-phenolic, biodegradable paint
remover.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data that may
be of use in improving this document should be addressed to: WR-ALC/LKJE, 460 2ND ST,
STE 221, Robins AFB, GA 31098-1640, by using the Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 8010
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business