MIL-PRF-85285E
Specification MIL-PRF-85285E, "Coating: Polyurethane, Aircraft and Support
Equipment"
Component A, B, or C (as applicable)
Type and class
Color (name and FED-STD-595 color number)
Manufacturer's name, product number, and batch number
Date of manufacture by month and year
VOC content in grams/liter
Net contents
Mixing and thinning instructions
3.10.1 Component containers. All containers of toxic and hazardous chemicals and
materials shall be labeled in accordance with the applicable federal, state, and municipal laws,
statutes, regulations, and ordinances. In addition to the labeling, the following shall appear on
each component container in every kit, on each exterior shipping container, and on the case of
containers less than 1 pint.
CAUTION
THIS COATING MATERIAL IS TOXIC AND FLAMMABLE (if applicable)
DO NOT USE IN CONFINED AREAS
DO NOT USE WHERE THERE ARE OPEN FLAMES, ARCING EQUIPMENT,
HOT SURFACES, NOR WHERE SMOKING IS PERMITTED.
USE ONLY WITH ADEQUATE VENTILATION.
AVOID BREATHING OF VAPOR.
DO NOT GET IN EYES, ON SKIN, ON CLOTHING.
IN CASE OF CONTACT, IMMEDIATELY FLUSH EYES OR SKIN WITH PLENTY OF
WATER. FOR EYES, GET MEDICAL ATTENTION.
3.10.2 Lid (component B only). Each lid of component B material shall have a red printed
label with the following information:
"USE CAUTION.
OPEN SLOWLY."
3.10.3 Precautions. Each kit shall include a sheet listing the following precautions:
a. The surface to be coated must be clean (free of oil, dust, etc.)
b. Spray equipment must be adequately grounded. Clean equipment immediately
after use. For class W only, use water followed by thinner. For all other
classes use thinner only. In all cases thinner conforming to MIL-T-81772, type
I shall be used.
c. Mix only the amount of coating to be used within four hours.
d. Never mix coating or individual component from one vendor with that of another vendor.
Components from different kits are not interchangeable. For example, do not use
Component A in white with component B in gray.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business