TT-P-645C
3.10 Off-gassing. The paint shall be tested for off-gassing in accordance with the requirements of 4.8. The Navy will review the results and assign a usage category. The required usage category is "Permitted" or "Limited" (see 4.8 and 6.8).
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the contract, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure that supplies and services conform to prescribed requirements.
4.2 First article inspection. First article inspection shall be performed on a random sample drawn from the first production batch of paint. First article inspection shall include all tests specified in table VII and 4.4 including those designated in table VII as a "quality conformance inspection test" (see 6.3).
4.3 Quality conformance inspection. Quality conformance inspection shall be provided in accordance with Test Methods 1011, 1021, and 1031 of FED-STD-141, and shall consist of all tests designated as "quality conformance inspection test" in table VII.
4.4 Inspection conditions. Unless otherwise specified in the applicable test paragraph of this specification, all inspections shall be performed in accordance with the test conditions specified in table VII and 4.6.
4.5 Lot. A lot shall consist of all material manufactured at one time (batch) or all material produced by mixing multiple batches into one uniform unit of material. Failure of a sample to pass any test should be cause for rejection of the lot.
TABLE VII. Test procedures.
Property |
Requirement |
Test |
Toxicity |
3.2.1 |
4.7 |
Pigment content |
Table III |
ASTM D2698 |
Volatile vehicle content |
Table III |
ASTM D2369 |
Nonvolatile vehicle content |
Table III |
FED-STD-141, Test Method 4053.2 |
Water content 2/ |
Table III |
ASTM D95, ASTM D1364 |
VOC g/L |
Table III |
4.6.4 |
Metal and asbestos content |
3.3.1 Table III |
4.6.2 |
Hazardous air pollutants 2/ |
3.3.2 |
4.6.3, ASTM E1252 |
Phthalic anhydride 2/ |
Table II |
---- |
Rosin/rosin derivatives 2/ |
Table II |
---- |
Phenolic resin 2/ |
Table II |
FED-STD-141, Test Method 5141.1 |
Soya oil 2/ |
Table II |
ASTM D2800, ASTM D2245 |
Drying oil acids 2/ |
Table II |
---- |
Silica content 2/ |
Table III |
---- |
Coarse particles/skins |
Table III |
ASTM D185 |
Viscosity 1/ |
Table III |
ASTM D562 |
Weight per liter (gallon) 1/ |
Table III |
ASTM D1475 |
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business