TT-P-645 Paint, Alkyd Type, Formula Number 84This specification covers an anticorrosive paint for general purpose applications to steel and aluminum. The paint contains a maximum of 250 grams of volatile organic compounds VOC per liter 2.08 pounds of VOC per gallon. This paint is to be used as supplied with no thinning.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19

TT-P-645C

TABLE VIII. Test methods for evaluating solid waste physical/chemical methods, EPA SW-846.

Metal/material	Digestion test method
All metals, except chromium (VI)	3050
Chromium (VI)	3060
Metal/material	SW-846 analysis test method
Antimony	7040 or 7041
Arsenic	7060 or 7061
Barium	7080 or 7081
Cadmium	7131
Total chromium	7190
Chromium (VI)	7195, 7196, or 7197
Lead	7421
Mercury	7470 or 7471
Nickel	7520 or 7521
Selenium	7740 or 7741
Silver	7760 or 7761

TABLE IX. Methods for chemical analysis of water and waste, EPA 600/4-79-020.

Metal/material	Test method
Beryllium	210.1 or 210.2
Cobalt	219.1 or 219.2
Copper	220.1 or 220.2
Fluoride	340.1, 340.2, or 340.3
Molybdenum	246.1 or 246.2
Thallium	279.1 or 279.2
Vanadium	286.1 or 286.2
Zinc	289.1 or 289.2

4.6.2.1 Tantalum and tungsten content. Tantalum and tungsten content of the paint shall be determined using any appropriate spectroscopy test method. The tests shall be conducted in accordance with the equipment manufacturer's directions for the use of the instrument. The paint manufacturer shall justify the test method choice and analytical accuracy. Test results for tantalum and tungsten shall be as specified in table IV and table V.

4.6.3 Hazardous solvent content. Hazardous solvent content shall be determined in accordance with Test Methods

7356 and 7360 of FED-STD-141. Solvent fractions shall be identified in accordance with ASTM E1252. Test results shall be recorded as percent by weight of the total paint. The test results for each solvent shall be as specified

in 3.3.2 and table VI.

4.6.3.1 Alternate analysis methods. Manufacturer may use other analysis methods if such methods are shown to identify and quantify the hazardous air pollutants with the accuracy required (see 6.3).

4.6.4 Volatile organic compounds (VOC). VOC tests shall be conducted on paint prepared for application in

accordance with the manufacturer's ASTM F718 data sheet. The VOC test shall be conducted in accordance with

40 CFR 60, Appendix A-7, (EPA) Method 24, and shall be in accordance with the requirements of table III.