MIL-PRF-24647E
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
CODE OF FEDERAL REGULATIONS (CFR)
29 CFR 1910
-
Occupational Safety and Health Standards
29 CFR 1910.1200
-
Hazard Communication
40 CFR 60,
-
Determination of Volatile Matter Content, Water Content, Density,
Appendix A,
Volume Solids, and Weight Solids of Surface Coatings
Method 24
40 CFR 261.24(a),
-
Toxicity Characteristics Leaching Procedure (TCLP)
Method 1311
(Copies of these documents are available from the Superintendent of Documents, U.S. Government Printing Office,
Washington DC 20401 or online at www.gpoaccess.gov/index.html.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS (ACGIH)
Threshold Limit Values (TLV) for Chemical Substances and Physical Agents in the Work Environment
and Biological Exposure Indices
(Copies of this document are available from the American Conference of Governmental Industrial Hygienists, 1330
Kemper Meadow Drive, Cincinnati, OH 45240 or online at www.acgih.org.)
ASTM INTERNATIONAL
ASTM A1011/A1011M
-
Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon,
Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with
Improved Formability, and Ultra-High Strength
ASTM B209
-
Standard Specification for Aluminum and Aluminum-Alloy Sheet and
Plate
ASTM D562
-
Standard Test Method for Consistency of Paints Measuring Krebs Unit
(KU) Viscosity Using a Stormer-Type Viscometer
ASTM D660
-
Standard Test Method for Evaluating Degree of Checking of Exterior
Paints
ASTM D661
-
Standard Test Method for Evaluating Degree of Cracking of Exterior
Paints
ASTM D714
-
Standard Test Method for Evaluating Degree of Blistering of Paints
ASTM D1475
-
Standard Test Method for Density of Liquid Coatings, Inks, and Related
Products
ASTM D2244
-
Standard Practice for Calculation of Color Tolerances and Color
Differences from Instrumentally Measured Color Coordinates
ASTM D2369
-
Standard Test Method for Volatile Content of Coatings
ASTM D2621
-
Standard Test Method for Infrared Identification of Vehicle Solids from
Solvent-Reducible Paints
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business