MIL-PRF-24647E
TABLE III. Total metals content.
Metals content (total),
Requirement
%WT maximum
Antimony and/or its compounds
0.015
Arsenic and/or its compounds
0.005
Barium and/or its compounds (excluding barite)
0.10
Beryllium and/or its compounds
0.0002
Cadmium and/or its compounds
0.0005
Chromium (VI) compounds
0.001
Chromium and/or chromium (III) compounds
0.56
Cobalt and/or its compounds
0.005
Copper and/or its compounds
0.01
Fluoride salts
0.18
Lead and/or its compounds
0.005
Mercury and/or its compounds
0.0002
Molybdenum and/or its compounds
0.35
Nickel and/or its compounds
0.02
Selenium and/or its compounds
0.002
Silver and/or its compounds
0.001
Tantalum and/or its compounds
0.10
Thallium and/or its compounds
0.007
Tungsten and/or its compounds
0.10
Vanadium and/or its compounds
0.01
Zinc and/or its compounds
0.25
3.3.5.1 Identification characteristics. Manufacturer shall disclose to the Government the identification
characteristics required in table IV in accordance with the test method listed therein for each individual paint (mixed
and individual components, as applicable) in the system. Paint identification characteristics listed in table IV, when
tested in accordance with requirements in 3.4, shall conform to the values disclosed by the manufacturer.
3.3.5.2 Toxicity. The paint shall contain no detectable asbestos, asbestos from pigments, benzene, toluene,
chlorinated solvents, hydrolyzable chlorine derivatives, coal tar or coal tar derivatives, tri-butyl tin compounds, or
any ACGIH carcinogenic or ACGIH suspected carcinogenic compounds. Crystalline silica shall be limited to
0.1 percent by weight of the dry film (see 3.5).
3.3.5.3 Toxic products. When evaluated in accordance with 4.6 [the Health Hazard Assessment (HHA)], the
paint shall have no adverse effect on the health of personnel when used for its intended purpose (see 4.6 and 6.6).
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business