NOT MEASUREMENT
SENSITIVE
MIL-DTL-11195H
10 November 2011
SUPERSEDING
MIL-DTL-11195G
31 July 2003
DETAIL SPECIFICATION
ENAMEL, LUSTERLESS, FAST DRY, VOC COMPLIANT,
(FOR USE ON AMMUNITION AND OTHER METALS)
This specification is approved for use by all Departments and Agencies
of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a fast drying, lusterless, low volatile organic
compound (VOC) content alkyd enamel for use on exterior and interior metal surfaces. This
enamel is formulated free of lead and chromate (hexavalent chromium), with a maximum VOC
content of 420 grams/liter (g/l) (3.5 pounds/gallon (lbs/gal)) as applied. The specified type II
coating contains corrosion inhibiting pigments, formulated free of hazardous air pollutants
(HAP-free).
1.2 Part or identifying number (PIN). Use the following example to create the PINs to be used for
coatings acquired to this specification.
M11195
-
X
-
XXXX
-
XXXXX
Specification
Coating type designator
Container size designator
Color designator
Identifier
Type II = 2
1 pint = 001P
FED-STD-595
1 quart = 001Q
color chip number
1 gallon = 001G
1ounce = 01OZ
Comments, suggestions, or questions on this document should be addressed to: Director, U.S.
Army Research Laboratory, Weapons and Materials Research Directorate, Materials
Manufacturing Technology Branch, Specifications and Standards Office, ATTN: RDRL-WMM-D,
Aberdeen Proving Ground, MD 21005-5069 or emailed to richard.j.squillacioti.civ@mail.mil.
Since contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at https://assist.daps.dla.mil/.
AMSC N/A
FSC 8010
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business