MIL-DTL-24631A(SH)
2.2
Government documents.
2.2.1 Specifications, standards, and handbooks. The following
specifications, standards, and handbooks form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these
documents are those listed in the issue of the Department of Defense Index of
Specifications and Standards (DoDISS) and supplement thereto, cited in the
solicitation (see 6.2).
SPECIFICATIONS
DEPARTMENT OF DEFENSE
MIL-P-24441
- Paint, Epoxy-Polyamide, General
Specification for.
MIL-P-24441/20 - Paint, Epoxy-Polyamide, Green Primer,
Formula 150, Type III.
MIL-P-24441/29 - Paint, Epoxy-Polyamide, Green, Primer,
Formula 150, Type IV.
MIL-DTL-24631/1 - Paint, Epoxy, Black R01.8, Navy Formula
184, Type I. (Metric)
MIL-DTL-24631/2 - Paint, Epoxy, Dark Gray R0 3.6, Navy
Formula 185, Type I. (Metric)
MIL-DTL-24631/3 - Paint, Epoxy, White, Navy Formula 186,
Type I. (Metric)
MIL-DTL-24631/4 - Paint, Polyester Urethane, Black R0 1.8,
Navy Formula 187, Type II. (Metric)
MIL-DTL-24631/7 - Paint, Polyester Urethane, Black, Navy
Formula 187, Type II. (Metric)
STANDARDS
FEDERAL
FED-STD-141
- Paint, Varnish, Lacquer and Related
Materials; Methods of Inspection,
Sampling and Testing.
FED-STD-595
- Colors Used in Government Procurement.
(Unless otherwise indicated, copies of the above specifications,
standards, and handbooks are available from the Standardization Document Order
Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The
following other Government documents, drawings, and publications form a part
of this document to the extent specified herein. Unless otherwise specified,
the issues are those cited in the solicitation.
PUBLICATIONS
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY (USEPA)
40 Code of Federal Regulations (CFR) ch.1, part 60, appendix
A, method 24 - Determination of Volatile Matter Content,
Water Content, Density, Volume Solids and Weight Solids of
Surface Coatings.
4O CFR Part 261, Appendix II - Toxicity Characteristic
Leaching Procedure (TCLP).
DEPARTMENT OF LABOR
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA)
29 CFR Parts 1910, 1915, 1917, 1918, 1926 and 1928
Occupational Safety and Health Standards July 1, 1996.
29 CFR 1915 Ch. XVII, Appendix K to 1915.1001 - Polarized
Light Microscopy of Asbestos, Method ID-191.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business