MIL-DTL-24631A(SH)
ASTM's (Continued)
ASTM D 2369 - Standard Test Method for Volatile Content of
Coatings. (DoD adopted)
ASTM D 2698 - Standard Method for Determination of the
Pigment Content of Solvent-Reducible Paints
by High-Speed Centrifuging. (DoD adopted)
ASTM D 2805 - Standard Test Method for Hiding Power of
Paints by Reflectometry.
ASTM D 3278 - Standard Test Method for Flash Point of
Liquids by Setaflash Closed-Cup Apparatus.
(DoD adopted)
ASTM D 4400 - Standard Test Method for Sag Resistance of
Paints Using a Multinotched Applicator.
ASTM D 4615 - Standard Specification for n-Butyl Acetate
(All Grades).
ASTM E 1252 - Standard Practice for General Techniques for
Qualitative Infrared Analysis.
ASTM G 53
- Standard Practice for Operating Light- and
Water-Exposure Apparatus (Fluorescent UV-
Condensation Type) for Exposure of
Nonmetallic Materials. (DoD adopted)
(Application for copies should be addressed to the American Society
for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA
19428-2959.)
2.4 Order of precedence. In the event of a conflict between the text
of this document and the references cited herein (except for related
specification sheets), the text of this document takes precedence. Nothing in
this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3.
REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as
specified herein and in accordance with the applicable specification sheet
(see 2.2.1). In the event of any conflict between the requirements of this
specification and the specification sheet, the latter shall govern.
3.2 First article. When specified (see 6.2), a sample shall be
subjected to first article inspection in accordance with 4.2.
3.3 Composition. The paint supplied shall consist of ingredients in
the proportions shown in the appropriate specification sheets (see 6.2),
except that minor variation of the ratio of titanium dioxide pigment to carbon
black pigment, as applicable, is permitted to meet the color requirements,
provided all other specification requirements are met (see 4.4.4).
3.4
Quantitative requirements.
3.4.1 Specification sheet requirements. When tested in accordance with
table II and any applicable paragraphs of 4.5, the paint properties listed
shall be in accordance with the quantitative requirements of this
specification and the applicable specification sheet (see 6.2):
(a)
Pigment Content, percent (%) by weight(wt)
(b)
Volatile content, %wt
(c)
Nonvolatile vehicle, %wt
(d)
Consistency, Kreb units
(e)
Sag resistance, mils
(f)
Fineness of grind, Hegman units
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business