INCH-POUND
MIL-PRF-14105E
30 November 2011
SUPERSEDING
MIL-P-14105D
6 March 1995
PERFORMANCE SPECIFICATION
PAINT, HEAT-RESISTING (FOR STEEL SURFACES)
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a heat-resisting, ambient dry/heat cure paint that will
withstand temperatures to a maximum of 1,400 °F (760 °C). The paint is intended for use on
steel surfaces exposed to high temperatures and exterior weathering. The coating is free of
hazardous air pollutants (HAP-free). The coating is lead and hexavalent chromium free.
1.2 Types. The coating will be furnished in the following types as specified (see 6.2).
Type I - Lead and chromate free, HAP-free formulation to meet a maximum
volatile organic compound (VOC) content of 3.5 pounds/gallon (lbs/gal)
(420 grams/liter (g/l)) as applied.
Type II - Lead and chromate free, HAP-free formulation to meet a maximum
VOC content of 2.8 lbs/gal (340 g/l) as applied.
1.2.1 Part or identifying number (PIN). Use the following example to create the PINs to be used for
coatings acquired to this specification. When other container sizes are required, change the designator
accordingly, such as 004G for 4 gallons or 005G for 5 gallons (see 3.4).
M14105 -
X
-
XXXX
-
XXXXX
Specification Coating type designator Container size designator Color designator
Identifier
Type I = 1
1 quart = 001Q
FED-STD-595
Type II = 2
1 gallon = 001G
color chip number
Comments, suggestions, or questions on this document should be addressed to: Director, U.S.
Army Research Laboratory, Weapons and Materials Research Directorate, Materials
Manufacturing Technology Branch, Specification and Standards Office, ATTN: RDRL-WMM-D,
Aberdeen Proving Ground, MD 21005-5069 or emailed to richard.j.squillacioti.civ@mail.mil.
Since contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at https://assist.daps.dla.mil/.
AMSC N/A
FSC 8010
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business