MIL-PRF-23377K
TABLE II. Test Methods Continued.
Requirement
Test
Test
Test Method
Paragraph
Paragraph
Viscosity
3.6.3
---
ASTM D1200
Pot life
3.6.4
---
ASTM D1200
Surface appearance
3.7.1
4.4.1
---
Drying time 1/
3.7.2
---
ASTM D5895
Lifting
3.7.3
4.5.3
---
Adhesion
3.7.4
4.5.4
ASTM D3359
Flexibility
3.7.5
4.5.5
ASTM D6905
Infrared reflectance (type II only)
3.7.6
4.5.6
---
Water resistance
3.8.1
4.5.7
---
Salt-spray corrosion resistance
3.8.2.1
4.5.8.1
---
Filiform corrosion resistance
3.8.2.2
4.5.8.2
---
Solvent resistance (cure)
3.8.3
4.5.9
ASTM D5402
Fluid resistance
3.8.4
4.5.10
---
Mixing and dilution
3.9.1
4.5.11.1
---
Application
3.9.2
4.5.11.2
---
Toxicity
3.3
4.5.12
---
Strippability
3.12
4.5.13
---
1/
Use panels designated A in table I.
4.5.1 Condition in container. Each component in its unopened container shall stand without
agitation for not less than 14 days at room temperature (see 4.5). After this period, the
containers shall be examined for bulging or other deformation due to internal pressure. Each
component container shall be opened and examined, then mixed by hand vigorously stirring with
a paddle for not more than 5 minutes, and examined for conformance to 3.5.2.
4.5.2 Accelerated storage stability. Not less than one full, unopened, sealed container of
each component shall be stored undisturbed for not less than 14 consecutive days in a location
maintained at 60 3 C (140 5 F). At the end of 14 days, the container(s) shall be allowed to
cool to room temperature (see 4.5). During the storage period, it is advised that the unopened
containers be placed in larger, vented containers to confine any splash that may occur if the lid of
the unopened container is blown off by gassing. If, upon removal, the unopened container is
deformed, do not open. If the container is not deformed, open carefully and examine its
contents. The primer coatings shall be admixed by 300 hand stirs in 2 minutes and examined for
conformance to 3.5.4.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business