MIL-PRF-23377K
1.3 Part or Identifying Number (PIN). The PINs to be used for primer coatings acquired to
this specification are created as follows:
M23377
-
X
-
XX
-
XXXX
Specification
Type designator
Class designator
Kit size designator
(C1, C2 or N)
(see 1.3.1)
identifier
1 = Type I
2 = Type II
1.3.1 Kit size. The primer coatings covered by this specification should be purchased by
volume, the unit being a kit containing two or three components. The kit component sizes need
not be of the same size. When this part numbering system is used, the kit size is to be identified
as:
Kit Size 1/
Kit Size Designator
Less than one pint
2/
4-pint (0.47-liter)
004P
4-quart (0.95-liter)
004Q
4-gallon (3.79-liter)
004G
20-gallon (75.7-liter)
020G
1/ The kit size and its designator may be modified for ease of procurement and is not limited.
2/ Designators for less than pint size kits (small touch-up kits) should be expressed in cubic
centimeters (cc) and should be designated by "C." Example: A type I, class C2, 50 cc kit
should be designated M23377-1-C2-050C.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3 and 4 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a part
of this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business