MIL-DTL-24607B
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as follows:
a.
First article inspection (see 4.2).
b.
Conformance inspection (see 4.3).
4.2 First article inspection. When specified (see 6.2), first article inspection shall be performed on a random
sample drawn from the first production batch of enamel. First article inspection shall include all tests specified in
4.3 Conformance inspection. Conformance inspection shall consist of all tests specified in table VI with a
footnote 1 notation.
4.3.2 Sampling for conformance testing. As a minimum, the contractor shall select a sample of sufficient size
to permit the performance of all the inspections and tests as specified in table VI. If one or more defects are found
in any sample, the entire lot (see 6.3.1) represented by the sample shall be rejected. If a lot is rejected, the contractor
has the option of analyzing the rejected lot for the defective characteristic(s) and adjusting ingredients within
allowed ranges as a new lot that shall be inspected and tested in accordance with table VI.
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business