MIL-DTL-24607B
TABLE VI. Tests.
Test
Requirements
Test Method
Soluble and total metals content 2/
Hazardous air pollutants 2/
Color 1/
4.5.3 and ASTM D2444
Pigment content 3/
Table V
FED-STD-141 4021.1
Volatile percent 3/
Table V
ASTM D2369
Density 3/
Table V
ASTM D1475
Appearance 3/
ASTM D3359
Condition in container 1/
4.5.4.4 and FED-STD-141 3011.2
4.5.4.1, ASTM D1849, and
Storage stability partially-full container
FED-STD-141 3021.1
Storage stability full container
4.5.4.2 and ASTM D1849
VOC 1/
Table V
Brushing properties 1/
4.5.6 and FED-STD-141 4321.2
Sag resistance 3/
Table V
ASTM D4400
Rolling properties 1/ 3/
ASTM D5150
Spraying properties 1/
4.5.8 and FED-STD-141 4331.1
Odor 3/
ASTM D1296
Cross-cut adhesion tape test 1/ 3/
ASTM D3359
Flexibility
4.5.9 and FED-STD-141 6221
Resistance to ignition
Non-flaming properties
4.5.11 and ASTM E162
Flash point 1/ 3/
Table V
ASTM D3278
Water 3/
Table V
ASTM D95 or D1364
Coarse particles 1/ 3/
Table V
FED-STD-141 4092.1
Consistency 1/ 3/
Table V
ASTM D562
Fineness of grind 1/ 3/
Table V
ASTM D1210
Drying time 1/ 3/
Table V
ASTM D5895
Recoating
60-degree specular gloss 1/
Table V
ASTM D523
Contrast ratio 3/
Table V
ASTM D2805
NOTES:
1/
Conformance inspection test (see 4.3).
2/
By vender certification.
3/
Test shall be conducted in accordance with the test method prescribed by this table.
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business