MIL-DTL-24607B
4.11 Rolling properties. The rolling properties test shall be conducted in accordance with test method
4.12 Odor. The odor test shall be conducted in accordance with test method prescribed by table VI. Test
results shall be in accordance with the requirements of 3.6.7.
4.13 Cross-cut adhesion tape test. The cross-cut adhesion tape test shall be conducted in accordance with test
4.14 Flash point. The flash point test shall be conducted in accordance with test method prescribed by table VI.
Test results shall be in accordance with the requirements of table V.
4.15 Water. The water test shall be conducted in accordance with test method prescribed by table VI. Test
results shall be in accordance with the requirements of table V.
4.16 Coarse particles. The coarse particles test shall be conducted in accordance with test method prescribed
4.17 Consistency. The consistency test shall be conducted in accordance with test method prescribed by table
4.18 Fineness of grind. The fineness of grind test shall be conducted in accordance with test method prescribed
4.19 Drying time. The drying time test shall be conducted in accordance with test method prescribed by table
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or
order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these
personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging
requirements are maintained by the Inventory Control Point's packaging activities within the Military Service or
Defense Agency, or within the military service's system commands. Packaging data retrieval is available from the
managing Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by
20
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business