MIL-DTL-53030D
TABLE V. Index - Continued.
Requirement
Test
Paragraph or
Item
ASTM Method
Paragraph
Table
60º specular gloss
D523
4.5.6.2
Table IV
VOC
D3960
4.5.6.3
3.5.3
Condition in container
-
4.5.7
3.6.1
component A
-
4.5.7.1
3.6.1.1
component B
-
4.5.7.2
3.6.1.2
Storage stability
-
4.5.8
3.6.2
component A
D1849
4.5.8.1
3.6.2.1
component B
-
4.5.8.2
3.6.2.2
Accelerated storage stability
-
4.5.9
3.6.3
Freeze-thaw stability
-
4.5.10
3.6.4
Mixing properties
-
4.5.11
3.6.5
Spraying properties
-
4.5.12
3.6.6
Flexibility
D522
4.5.13
3.7.1
method B
Adhesion
D3359
4.5.14
3.7.2
method B
Water resistance
D870
4.5.15
3.7.3
Hydrocarbon fluid resistance
-
4.5.16
3.7.4
Salt spray resistance
B117
4.5.17.1
3.7.5.1
Cyclic corrosion resistance 1/
-
4.5.17.2
3.7.5.2
Fluid resistance
-
4.5.18
3.7.6
Recoating
-
4.5.19
3.7.7
Weather resistance
G90
4.5.20
3.7.8
STB resistance
-
4.5.21
3.7.9
1/ General Motors Standard: GMW 14872.
4.5.4 Analysis of component A.
4.5.4.1 Nonvolatile (total solids) content. Determine the total solids (nonvolatile content) of
component A in accordance with ASTM D7232. Check for compliance with table II.
4.5.4.2 Pigment analysis. Extract the pigment as in ASTM D2371, except use ethanol for
extraction. Make appropriate qualitative and quantitative tests on the extracted pigment to
determine if only permissible pigments were used. Nonconformance to table II shall constitute
failure of this test.
4.5.4.2.1 Quantitative titanium dioxide. Determine titanium dioxide content by ASTM D1394.
Nonconformance to the requirements in table I shall constitute failure of this test.
4.5.4.2.2 Zinc phosphate content. Determine the zinc phosphate content in accordance with
4.5.4.2.2.1 and 4.5.4.2.2.2.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business