MIL-DTL-53030D
ASTM D4214
-
Standard Test Methods for Evaluating the Degree of
Chalking of Exterior Paint Films. (DoD adopted)
ASTM D5895
-
Standard Test Methods for Evaluating Drying or Curing
During Film Formation of Organic Coatings Using
Mechanical Recorders.
ASTM D7232
-
Standard Test Method for Rapid Determination of the
Nonvolatile Content of Coatings by Loss in Weight.
(DoD adopted)
ASTM G90
-
Standard Practice for Performing Accelerated Outdoor
Weathering of Nonmetallic Materials Using Concentrated
Natural Sunlight.
(Copies of these documents are available from www.astm.org or ASTM International, 100 Barr
Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959.)
GENERAL MOTORS ENGINEERING STANDARDS
GMW 14872
-
Cyclic Corrosion Laboratory Test
(Copies of this document are available from www.ihs.com or General Motors International,
General Motors Technical Center, Warren, MI 48092.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Qualification. The primer furnished under this specification shall be a product which is
qualified for listing on the applicable Qualified Products Database (QPD) before contract award
(see 4.2 and 6.4). Any change in the formulation of a qualified product shall necessitate its
requalification. The material supplied under contract shall be identical, within manufacturing
tolerances, to the product receiving qualification.
3.2 Color. The color of the primer shall be characteristic of titanium dioxide pigments or a light
gray not darker than color chip number 27722 of FED-STD-595.
3.3 Toxic ingredients. Other than parachlorobenzotrifluoride (PCBTF), the primer shall contain no
benzene (benzol), chlorinated solvents, or ethylene based glycol ethers and their acetates (see 4.5.3).
3.4 Compositions. The primer shall consist of two components. Component A shall be an epoxy
resin solution containing all of the corrosion inhibitors and pigments and shall be furnished in
primary containers of l quart, l gallon, and 5 gallon capacities, as specified (see 6.2). Component
B shall be a clear or milky resin solution and shall be furnished in primary containers of l/2 pint, l
quart or l gallon capacities, as specified (see 6.2). The primer shall be furnished as a kit and when
the components are mixed, four parts by volume of component A to one part by volume of
component B, and reduced as specified by the manufacturer, a product meeting the applicable
requirements of this specification shall result. The primer kit sizes shall be as specified in 3.4.1.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business