MIL-PRF-24667 Coating System, Non-Skid, For Roll, Spray, Or Self-Adhering ApplicationThis specification covers non-skid systems, coatings, and coverings for application to weather decks, flight decks, and hangar decks of air capable amphibious aviation and aviation ships. Coatings are applied to steel, aluminum, reinforced plastic, and special hull treatment \(SHT\) surfaces by spraying, rolling, or other application method as designated by the manufacturer of the non-skid system.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

MIL-PRF-24667C

3.3 Identification characteristics. Values for identification characteristics shall be provided by individual

contractors for characteristics as specified in table IV. The values shall be established for each individual coating

which comprises the coating system prior to qualification testing. The purpose of these values is to serve as a basis

for determining that the material being offered is essentially the same as that which was approved under qualification

testing. Conformance inspections shall be as specified (see 4.3).

TABLE IV. Identification characteristics.

Two-part coating

One-part

Type XI

Base

Curing

coating or

Characteristic

Aggregate

sealing

material,

agent,

combined

compound

component

mixture

Chemical nature (percent [%] of each

material which comprises 2% or more

of the coating)

Percent (%) resin solids by mass

Percent (%) pigment by mass

Percent (%) volatile matter by mass

Percent (%) aggregate by mass

Percent (%) solids by mass (not less than

20%)

Percent (%) ash by mass (not more than

4%)

Viscosity (not less than 60 seconds nor

more than 160 seconds)

Aggregate size distribution (ASTM

C136)

Aggregate composition (% of each

material which comprises 10% or more

of the aggregate)

Mass (kilograms per liter. [kg/L], pounds

per gallon [lbs/gal])

Epoxy content 1/

(ASTM D1652)

Active amine hydrogen content

Pigment analysis

Infrared spectrum of resin