An Integrated Publishing, Inc. Site

An Integrated Publishing Website

MIL-PRF-24667 Coating System, Non-Skid, For Roll, Spray, Or Self-Adhering ApplicationThis specification covers non-skid systems, coatings, and coverings for application to weather decks, flight decks, and hangar decks of air capable amphibious aviation and aviation ships. Coatings are applied to steel, aluminum, reinforced plastic, and special hull treatment \(SHT\) surfaces by spraying, rolling, or other application method as designated by the manufacturer of the non-skid system.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

MIL-PRF-24667C

4.3 Conformance inspection. Conformance inspection shall consist of the conformance tests specified in table

XV.

TABLE XV. Conformance tests.

Requirement

Test

Characteristics

Types

paragraph

Coefficient of friction 1/ and 3/

All types

3.4

4.5.1

Abrasion of arresting cable 1/

Comp L only

3.5

4.5.2

Impact resistance 2/

I�X

3.6

4.5.3

Resistance to wear 1/

I�X

3.7

4.5.4

Protective cover removal 3/

3.8

4.5.5

Adhesion

3.9

4.5.6

Flash point

I�X

3.10

4.5.7

Resistance to chemical solutions

(type XI only) 3/

All types

3.11

4.5.8

Appearance of dried coating

I�X

3.14

4.5.11

Application properties

I�X

3.15

4.5.12

Color

I�X

3.16

4.5.13

Size

3.31

4.5.28

Condition in container

I�X

3.17

4.5.14

Coverage

I�X

3.18

4.5.15

Drying time

I�X

3.19

4.5.16

Pot life

I�X

3.20

4.5.17

Flexibility 1/

III and X

3.22

4.5.19

Weight 1/ and 3/

All types

3.29

4.5.26

Thickness 3/

3.30

4.5.27

NOTES:

Need only to be performed on first lot and every 19,000 L (5000 gal) thereafter.

Testing on both conditions (4.5.3 (a) and (b)) shall be performed on the first lot delivered and every

19,000 L (5000 gal) thereafter. For all other lots the seawater immersion testing condition (4.5.3 (a))

can be omitted for conformance testing.

Type XI. Testing shall be performed on first lot and every 10,000 square feet of deck covering

thereafter.

4.4 Preparation for testing.

4.4.1 Standard conditions. In case of dispute, with the exception of Type VIII, tests shall be performed at

standard testing conditions, which are 75�5 �F (24�2 �C) and a relative humidity of 50�5 percent, with the exception

of 4.5.12 which shall be performed at the temperatures specified.

4.4.1.1 Type VIII. Low temperature curing materials shall be applied and cured at 35 �F (2 �C). Testing shall

be conducted at standard conditions unless otherwise specified herein.