MIL-PRF-24667 Coating System, Non-Skid, For Roll, Spray, Or Self-Adhering ApplicationThis specification covers non-skid systems, coatings, and coverings for application to weather decks, flight decks, and hangar decks of air capable amphibious aviation and aviation ships. Coatings are applied to steel, aluminum, reinforced plastic, and special hull treatment \(SHT\) surfaces by spraying, rolling, or other application method as designated by the manufacturer of the non-skid system.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

MIL-PRF-24667C

ASTM F137

Standard Test Method for Flexibility of Resilient Flooring Materials with

Cylindrical Mandrel Apparatus (DoD adopted)

ASTM F718

Standard for Shipbuilders and Marine Paints and Coatings

Product/Procedure Data Sheet (DoD adopted)

ASTM G8

Standard Test Methods for Cathodic Disbonding of Pipeline Coatings

ASTM G14

Standard Test Method for Impact Resistance of Pipeline Coatings

(Falling Weight Test)

ASTM G154

Standard Practice for Operating Fluorescent Light Apparatus for UV

Exposure of Nonmetallic Materials

(Copies of these documents are available from ASTM International, 100 Barr Harbor Dr., PO Box C700, West

Conshohocken, PA 19428-2959 or online at www.astm.org.)

SAE INTERNATIONAL (SAE)

SAE AMS1424

Deicing/Anti-Icing Fluid, Aircraft, SAE Type 1 (DoD adopted)

SAE AMSC9084

Cloth, Glass, Finished, for Resin Laminates (DoD adopted)

(Copies of these documents are available from SAE World Headquarters, 400 Commonwealth Drive,

Warrendale, PA 15096-0001 or online at www.sae.org.)

SOCIETY FOR PROTECTIVE COATINGS (SSPC)

SSPC-PA 2

Measurement of Dry Coating Thickness with Magnetic Gages (DoD

adopted)

SSPC-SP 1

Solvent Cleaning (DoD adopted)

SSPC-SP 3

Power Tool Cleaning (DoD adopted)

SSPC-SP 10

Near-White Blast Cleaning (DoD adopted)

(Copies of these documents are available from SSPC Publication Sales, 40 24th Street, 6th floor, Pittsburgh, PA

15222-4656 or online at www.sspc.org.)

2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited

herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws

and regulations unless a specific exemption has been obtained.

3. REQUIREMENTS

3.1 Qualification. Non-skid systems furnished under this specification shall be products that are authorized by

the qualifying activity for listing on the applicable qualified products list before contract award (see 4.2 and 6.3).

3.2 Materials. Each individual component and final combined product of the total non-skid system qualified to

this specification shall, when mixed and applied in accordance with the manufacturer's instructions, be in

accordance with the appropriate requirements. The composition of the system furnished to this specification shall be

the responsibility of the manufacturer, except as limited by this specification.