MIL-PRF-24667 Coating System, Non-Skid, For Roll, Spray, Or Self-Adhering ApplicationThis specification covers non-skid systems, coatings, and coverings for application to weather decks, flight decks, and hangar decks of air capable amphibious aviation and aviation ships. Coatings are applied to steel, aluminum, reinforced plastic, and special hull treatment \(SHT\) surfaces by spraying, rolling, or other application method as designated by the manufacturer of the non-skid system.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

MIL-PRF-24667C

3.35.2 Type XI. Each container shall be clearly labeled with directions for application and with the following

information:

Brand name

Preparation of surface including cleaning agents and primers if required

Method of application

Limit of safe storage and stowage

Safety precautions during application and storage and stowage

4. VERIFICATION

4.1 Classification of inspections. The inspection requirements specified herein are classified as follows:

Qualification inspection (see 4.2).

Conformance inspection (see 4.3).

4.2 Qualification inspection. Tests specified in 4.5.23 (pressure cycling), 4.5.24 (strippability), and 4.10

(performance in-service) shall be performed by the Government. Tests at other than a Government laboratory shall

be monitored by the Defense Contract Management Area Operations (DCMAO). Qualification tests shall consist of

the tests specified in table XIII. The service test shall be conducted on an in-service Naval vessel as specified in

4.10 after successful completion of all laboratory tests with the exception of 4.5.25.1, which shall be performed

concurrently. Testing of products on Government ships shall be conducted at the convenience of the Government.