TT-P-28H
FEDERAL REGULATIONS
40 CFR 60, Appendix A, Method 24
- Determination of Volatile Matter Content, Water Content, Density, Volume Solids, and Weight Solids of Surface Coatings
29 CFR 1910 - Occupational Safety and Health Administration, Department of Labor
(Copies of these documents are available from the Superintendent of Documents, U.S. Government Printing
Office, Washington DC 20401 or online at www.gpoaccess.gov/index.html.)
EPA SW-846, Method 1311
- TCLP (Toxicity Characteristic Leaching Procedure)
(Copies of this document are available from the Environmental Protection Agency, Ariel Rios Building, 1200
Pennsylvania Avenue, N.W., Washington DC 20460 or online at www.epa.gov.)
2.2 Other publications. The following documents form a part of this specification to the extent specified herein. Unless a specific issue is identified, the issue in effect on date of invitation for bids or request for proposal shall apply.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z129.1 - Hazardous Industrial Chemicals - Precautionary Labeling (DoD adopted) (Copies of this document are available from the American National Standards Institute, 25 W. 43rd St, 4th
Floor, New York, NY 10036 or online at https://webstore.ansi.org/.)
ASTM INTERNATIONAL
ASTM A1008/A1008M
ASTM A1011/A1011M
- Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
- Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM B117 - Standard Practice for Operating Salt Spray (Fog) Apparatus (DoD
adopted)
ASTM D562 - Standard Test Method for Consistency of Paints Measuring Krebs Unit
(KU) Viscosity Using a Stormer-Type Viscometer (DoD adopted)
ASTM D609 - Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing
Paint, Varnish, Conversion Coatings, and Related Coating Products
(DoD adopted)
ASTM D610 - Standard Test Method for Evaluating Degree of Rusting on Painted Steel
Surfaces (DoD adopted)
ASTM D962 - Standard Specification for Aluminum Powder and Paste Pigments For
Paints
ASTM D1308 - Standard Test Method for Effect of Household Chemicals on Clear and
Pigmented Organic Finishes (DoD adopted)
ASTM D2698 - Standard Test Method for Determination of the Pigment Content of
Solvent-Reducible Paints by High-Speed Centrifuging (DoD adopted)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business