TT-P-28H
ASTM D3278 - Standard Test Methods for Flash Point of Liquids by Small Scale Closed- Cup Apparatus (DoD adopted)
ASTM D3924 - Standard Specification for Standard Environment for Conditioning and
Testing Paint, Varnish, Lacquer, and Related Materials (DoD adopted)
ASTM E1252 - Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM F718 - Standard for Shipbuilders and Marine Paints and Coatings
Product/Procedure Data Sheet (DoD adopted)
(Copies of these documents are available from ASTM International, 100 Barr Harbor Dr., PO Box C700, West
Conshohocken, PA 19428-2959 or online at www.astm.org.)
SOCIETY FOR PROTECTIVE COATINGS (SSPC)
SSPC-SP 1 - Solvent Cleaning (DoD adopted)
(Copies of this document are available from SSPC Publication Sales, 40 24th Street, 6th Floor, Pittsburgh, PA
15222-4656 or online at www.sspc.org.)
U.S. DEPARTMENT OF LABOR, OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA)
ID-191 - Polarized Light Microscopy of Asbestos
(Copies of this document are available from the U.S. Department of Labor/OSHA, OSHA Publications, PO Box
37535, Washington DC 20013-7535 or online at www.osha.gov.)
3. REQUIREMENTS
3.1 Qualification. The paints furnished under this specification shall be a product qualified for listing on the applicable qualified products list.
3.2 Composition.
3.2.1 Pigment. The pigment shall be a commercially pure, extra fine, leafing, aluminum pigment powder meeting the requirements of ASTM D962, Type I, Class B at a minimum.
3.2.2 Vehicle.
3.2.2.1 Type I vehicle. The Type I vehicle shall be a silicone resin or modified silicone resin together with driers as required to meet the requirements of this specification.
3.2.2.2 Type II vehicle. The Type II vehicle shall be a silicone or modified silicone powder dispersed in an epoxy powder with flow control agents as required to meet the requirements of this specification.
3.2.3 Volatile organic compound content (VOC).
3.2.3.1 Type I VOC. The maximum VOC of the Type I paint shall be 250 grams of solvent per liter of paint.
3.2.3.2 Type II VOC. The maximum VOC of the Type II powder coating shall be 75 grams of solvent per liter of coating. For planning purposes, 5.3 pounds of powder shall be considered the equivalent of one liter of liquid paint.
3.3 Quantitative requirements. When tested in accordance with 4.5, the paint shall conform to the quantitative requirements specified in Table I. Table I requirements not applicable to Type II powder coatings are total solids and vehicle solids (both assumed to be 100 percent), water content, flash point and consistency.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business