NOT MEASUREMENT
SENSITIVE
MIL-PRF-85582E
16 October 2012
SUPERSEDING
MIL-PRF-85582D
09 May 2002
PERFORMANCE SPECIFICATION
PRIMER COATINGS: EPOXY, WATERBORNE
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for corrosion inhibiting, chemical
and solvent resistant, waterborne, epoxy primer coatings that have a maximum volatile organic
compound (VOC) content of 340 grams per liter (g/L) (2.8 pounds per gallon [lb/gal]) as
supplied by the manufacturer.
1.2 Classification. The primer coatings will be of the following types and classes, as
specified (see 6.2):
1.2.1 Types. The types of primer coatings are as follows:
Type I
-
Standard pigments
Type II
-
Low infrared reflective pigments
1.2.2 Classes. The classes of primer coatings are as follows:
Class C1 -
Barium chromate based corrosion inhibitors
Class C2 -
Strontium chromate based corrosion inhibitors
Class N -
Non-chromate based corrosion inhibitors
Comments, suggestions, or questions on this document should be addressed to: Commander,
Naval Air Warfare Center Aircraft Division, Code 4L8000B120-3, Highway 547, Lakehurst, NJ
08733-5100 or emailed to michael.sikora@navy.mil. Since contact information can change, you
may want to verify the currency of this address information using the ASSIST Online database at
https://assist.dla.mil.
AMSC N/A
FSC 8010
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business