MIL-PRF-85582E
coatings shall be tested with FED-STD-595, color number 17925. Apply the topcoat to a total
dry-film thickness of 43 to 58 µ m (1.7 to 2.3 mils) in accordance with ASTM D823 Method D.
If the topcoat is applied in two coats, allow the first coat to air dry for 60 minutes prior to
application of the second coat. After application of the topcoat to the required thickness and
prior to testing, allow the coating to air dry for not less than 14 days.
4.5 Test methods. The tests of this specification shall be conducted in accordance with
table II and 4.5.1 through 4.5.10. Unless otherwise specified in the test method or paragraph,
laboratory test conditions shall be in accordance with ASTM D3924.
TABLE II. Test methods.
Test
Requirement Test Paragraph FED-STD-141
ASTM Method
Paragraph
Test Method
Toxicity
3.2.1
4.5.13
---
---
Lead and cadmium content
3.3
---
---
ASTM D3335
Chromium content
3.3.1.3
---
---
ASTM D3718
VOC solvent content
3.3.2
4.5.1
---
ASTM D3960
Fineness of grind
3.4.1
---
---
ASTM D1210
Condition in container
3.4.2
4.5.2
---
---
Storage stability
3.4.3
---
3022
---
Accelerated storage stability
3.4.4
4.5.14
---
ASTM D1849
Freeze-thaw stability
3.4.5
---
---
1/ ASTM D2243
Odor
3.5.2
---
---
ASTM D1296
Viscosity and pot life
3.5.3
---
---
ASTM D1200
Surface appearance
3.6.1
4.4.1
---
---
Drying time
3.6.2
---
---
ASTM D5895
Lifting
3.6.3
4.5.3
---
---
Adhesion
3.6.4
4.5.4
---
ASTM D3359
Flexibility
3.6.5
4.5.5
---
---
Infrared reflectance (type II only)
3.6.6
4.5.6
---
---
Water resistance
3.7.1
4.5.7
---
---
Salt-spray corrosion resistance
3.7.2.1
4.5.8.1
---
---
Filiform corrosion resistance
3.7.2.2
4.5.8.2
---
---
Solvent resistance (cure)
3.7.3
4.5.9
---
---
Fluid resistance
3.7.4
4.5.10
---
---
Mixing and dilution
3.8.1
4.5.11
---
---
Application
3.8.2
4.4.1
---
---
Strippability
3.11
4.5.12
---
---
1/ One freeze-thaw cycle shall be 16 hours at -9 ±3° C (15 ±5° F) followed by 8 hours at a room
temperature of 18 to 29.5° C (65 to 85° F).
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business