gal]\) as supplied by the manufacturer.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11

MIL-PRF-85582E

3.7.4 Fluid resistance. The primer coating shall withstand immersion for 24 hours in each

of synthetic lubricating oil conforming to MIL-PRF-23699 and synthetic hydraulic fluid

conforming to MIL-PRF-83282. Four hours after removal from the respective fluid, the coating

shall not exhibit any softening, blistering, loss of adhesion, nor any other coating deficiency.

Discoloration of the coating is acceptable and shall not be cause for rejection (see 4.5.10).

3.8 Working properties.

3.8.1 Mixing and dilution. The components of the primer coating shall homogeneously

blend when mixed with a mechanical mixer in the volume mixing ratio specified by the

manufacturer. When the admixed primer coating is diluted to application viscosity with water

(according to the manufacturer's instructions), there shall be no evidence of incompatibility and

the material shall be capable of application by spray methods (see 3.8.2). Transient

incompatibility exhibited during the first half of water addition is allowed. The primer coating

shall not separate into visually distinct layers within one hour after water dilution (see 4.5.11).

3.8.2 Application. The admixed primer coating shall be applied by conventional, airless,

high volume, low pressure (HVLP), or electrostatic spray equipment installed for water systems.

Application shall yield a smooth, uniform film with no runs or sags at a dry-film thickness of 15

to 23 microns (� m) (0.6 to 0.9 mil) (see 4.4.1).

3.9 Identification of material. Individual containers greater than one pint and cases of

containers less than one pint shall be identified with the following information:

MIL-PRF-85582E, Primer Coatings: Epoxy, Waterborne

Component identification (as applicable):

Component A - base component

Component B - curing agent

MIL-PRF-85582E, type I or II, class C1, C2, or N (as applicable)

Manufacturer's name and product number

Date of manufacture (month/year)

Batch number/net contents

VOC content in grams/liter

Mixing and thinning instructions

3.9.1 Component A containers. Component A containers shall have the following warning:

"WARNING! COMBUSTIBLE" (if applicable)

3.9.2 Component B containers. Component B containers shall have the following warning:

"WARNING! FLAMMABLE" (if applicable)