MIL-PRF-85582E
3.10 Precaution sheet. A printed precaution sheet with the following information shall be
included with each kit (see 1.3.1) as follows:
PRECAUTIONS
a.
The surface to be coated must be clean (free of oil, dust, etc.).
b.
Always add component B to component A NEVER THE REVERSE.
c.
Clean equipment immediately after use.
d.
Mix only the amount of primer coating to be used within 4 hours.
e.
Never mix coating or individual component from one vendor with that of another
vendor.
f. Apply over pretreated metal. On fiberglass-reinforced plastic, a prior coating of wash
primer in accordance with MIL-C-8514 will facilitate stripping without damage to the
fiberglass.
3.11. Strippability. The primer shall be tested in accordance with Methods A and B of
4.5.12, and a minimum of 90 percent of the coating shall be stripped by one of the methods.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are
classified as follows:
a. Qualification inspection (see 4.2).
b. Conformance inspection (see 4.3).
4.2 Qualification inspection. Qualification inspection shall consist of all the inspections
listed in this specification.
4.3 Conformance inspection.
4.3.1 Primer coating inspection. The conformance inspection shall be performed on each
production batch and provided when requested by the contracting officer or the qualifying
activity (see 6.2). The conformance inspection shall consist of all the tests specified in table II,
with the exception of toxicity (3.2.1), storage stability (see 3.4.3), accelerated storage stability
(see 3.4.4), freeze-thaw stability (see 3.4.5), corrosion resistance (see 3.7.2.1 and 3.7.2.2), and
strippability (3.11). There shall be no failures (see 6.5). Containers shall only be opened when
being tested.
4.3.2 Visual inspection of filled containers Samples shall be selected at random from each
lot (see 6.9) in accordance with ASQ-Z1.4, inspection level S-2. The lot size for this inspection
shall be the number of kits fully prepared for delivery. The selected samples shall be examined
for container fill, proper location, and completion of item identification (see 3.9), warning
statements (see 3.9.1 and 3.9.2), and the precaution sheet (see 3.10).
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business