INCH-POUND
MIL-PRF-25134C(USAF)
15 June 1996
SUPERSEDING
MIL-R-25134B(USAF)
10 March 1972
PERFORMANCE SPECIFICATION
REMOVER, PAINT AND LACQUER, SOLVENT TYPE
This specification is approved for use by the Department of the Air Force and is available for
use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers one type and grade of paint remover for use on aircraft and other
metal surfaces.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.
This section does not include documents cited in other sections of this specification or recommended
for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements
documents cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a part of this
document to the extent specified herein. Unless otherwise specified, the applicable issues of these
documents are those listed in the specific issue of the Department of Defense Index of Specifications
and Standards (DoDISS) and supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
FEDERAL
O-A-451
-
Ammonium Hydroxide, Technical
Beneficial comments (recommendations, additions, deletions) and any pertinent data that may be of use in
improving this document should be addressed to: (WR-ALC/LKJE, 460 2ND ST., STE 221 ROBINS AFB, GA
31098-1640), by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the
end of this document or by letter.
AMSC N/A
FSC 8010
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business