MIL-PRF-25134C(USAF)
SAE AMS 5046
Sheet, Strip, and Plate, Carbon Steel (SAE 1020 and 1025)
Annealed
(Applications for copies should be addressed to Society of Automotive Engineers, 400
Commonwealth Drive, Warrendale, PA 15096-0001)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein (except for related associated specifications or specification sheets), the
text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained. If there is a
conflict between the contents of this specification and an associated specification or specification
sheet, the associated specification or specification sheet will apply.
3. REQUIREMENTS
3.1 Qualification. The remover furnished under this specification shall be a product which has
been tested and passed the qualification tests specified herein, and has been listed or approved for
listing on the applicable qualified products list.
3.2 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible provided that
the materials meet or exceed the operational and maintenance requirements, and promote
economically advantageous life cycle costs.
3.3 Materials. The manufacturer is given wide latitude in the selection of raw materials and
processes of manufacture but shall be restricted by the requirements of this specification. The
materials shall be of high quality and entirely suitable for the purpose intended.
3.3.1 Toxicity. The material shall have no adverse affect on the health of personnel when used
for its intended purpose. The material shall not contain any hazardous compound as defined in
FED-STD-313, nor shall it contain any chemical listed in the current report of known carcinogens
of the National Toxicology Program.
3.3.2 Waste disposal characteristics. Surfactants used shall be a minimum of 90% biodegradable.
The supplier shall furnish certification from the surfactant manufacturer of the percent activity and
percent biodegradability of the surfactants. Additionally, the compound shall not contain more
than 2000 milligrams/liter of heavy metals.
3.4 Appearance. The remover shall be free from skins and lumps. It shall be readily mixable to a
homogeneous condition and shall remain homogeneous for a period of 1 hour when tested as
specified in 4.7.1.
3.5 Consistency and flow. The remover shall be a liquid of such consistency that a smooth, even
coating can be applied by brush, spray, or flowing (see 4.7.2).
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business